3
Planning
a. Posts provided with kit are designed to be
close to the ground for added stability, with
bottom rail section making contact with the
ground. A level ground section is preferable.
b. Pre-install the garden bed kit using instructions
provided and use as reference for marking
(4) post locations. Use chalk or other means
necessary to mark post location(s).
Procedure
a. Match lengths of components on raised
garden kit according to length.
b. Insert infill board into bottom and top rail
ensuring boards are flush on both ends
(Fig. 1 & 2).
c. Perform STEP B on remaining (3) raised
garden wall sections.
d. Take (1) Post from Kit and insert assembled
wall into routed post (Fig. 3).
e. Insert second wall assembly into remaining
routed section of post. Repeat process for
remaining components.
f. Install post inserts into posts. The top rail
should be flush with the opening on side
of post insert. Once rails are in place and
secured, use (2) #10x1
1
⁄
2
" screws to attach
post insert to rails (Fig. 4).
g. Once all (4) post inserts are installed on the
top, flip garden bed 180 degrees and install
remaining (4) post inserts provided with the
kit. Secure each post insert using (2) #10x1
1
⁄
2
"
screws. Ensure screws are flush with insert.
NOTE:
• Install (4) bottom inserts once all (4) top
inserts have been installed and secured.
• Garden bed is symmetrical; top and
bottom orientation are identical.
Fig. 1
Fig. 2
Fig. 4
1.
2.
Post Insert
Post Insert
Screws
Infill Board
Bottom Rail
Fig. 3
Post
