Barrett 4090 HF SDR Page 14 Operating And Installation Manual Download

Page: 14 / 233

BARRETT PRC-4090 TACTICAL HF SDR TRANSCEIVER - INTRODUCTION

Introduction

The Barrett PRC-4090 Tactical Transceiver is an SDR based HF SSB transceiver

with a frequency range of 1.5 to 30 MHz in transmit and 250kHz -30MHz. The

Barrett PRC-4090 is designed using the latest technology enabling a physically

small package with a full feature complement.

Designed to operate as in the most arduous environments, as encountered in

portable, off-road vehicles, vessels and aircraft environs, the Barrett PRC-4090

will provide many years of efficient and trouble free service.

The Barrett PRC-4090 supports features such as digital voice, data transmission

and remote diagnostics as well as established features such as Selective Call

(

Selcall), direct dial telephone connection to base stations fitted with telephone

interconnect systems (Telcall), GPS location, 2G and 3G ALE (Automatic Link

Establishment) and frequency hopping. These features make the Barrett PRC-

4090 HF Transceiver one of the most economical and versatile HF transceivers

available today.

Up to 1000 channels are available to be field or workshop programmable. Aux

iliary features such as Selcall, Telcall, scanning, mute status, alarm system etc.

can be individually enabled or disabled for every channel as required to suit

your operation.

The Barrett PRC-4090 Transceiver caters for increased use of HF data transmis-

sion for Internet email access and point-to-point data applications, by providing

a comprehensive data modem interface port, high speed transmit-to-receive

switching, a high stability frequency standard and an efficient cooling system

option.

The Barrett PRC-4090 is operated by a smartphone-style touchscreen, full col-

our Control Handset. The handset integrates seamlessly into manpack, vehicle

and base station installations when used with the cradle and cradle docking

station. The streamlined design and unobtrusive size easily mounts to a vehicle

dashboard or vessel helm.

The Barrett PRC-4090 Transceiver can be controlled from all major mobile and

desktop platforms. Full remote control is available via the Barrett PRC-4090

Remote Control app, providing unprecedented access to all transceiver func-

tionality across all major platforms.

Teamed with other matching Barrett products which include antennas, power

supplies, vehicle tracking packages and HF modems, the Barrett PRC-4090 HF

Transceiver becomes a powerful tool, providing solutions to many long distance

communication requirements.

Summary of Contents for 4090 HF SDR










































































































































































































































Search results

Summary of Contents for 4090 HF SDR

Reviews:

Related manuals for 4090 HF SDR

Brands by name

Popular brands

Barrett 4090 HF SDR, Operating And Installation Manual

Search results

Summary of Contents for 4090 HF SDR

Reviews:

Related manuals for 4090 HF SDR

Brands by name

Popular brands