16SG OPERATOR’S MANUAL REVISED 8/16/17 Page 12 of 23
5.
ENGINE START
{
XE "PARKING BRAKE"
}
: Both Vanguard and Honda options are equipped with
manual pull starts. The engine bail switch must be held down to allow the engine to start and run. If the bail
is released, the engine will shut down. After the engine is running and warmed up, increase the engine
speed fully to engage the centrifugal clutch and grinder wheel.
6. GRINDING: This Stump Grinder is manually pivoted back and forth to control the cutting and grinding.
As the stump is ground down, the handlebars can be adjusted and lowered for optimal operator position.
ENGINE CONTROLS
{
XE "ENGINE
CONTROLS"
}
FUEL SHUTOFF VALVE
{
XE "FUEL SHUTOFF VALVE"
}
: Must be in OPEN position for engine
{
XE
"ENGINE"
}
to run.
