16SG OPERATOR’S MANUAL REVISED 8/16/17 Page 7 of 23
SAFETY INSTRUCTIONS
{
XE "SAFETY INSTRUCTIONS"
}
OVERVIEW (continued)
WARNING
: Contact with the cutter wheel while in operation will cause serious injury or even
death. The teeth of the cutter wheel are sharp. Avoid contact even when the wheel is not moving.
Avoid inclines if possible.
WARNING
: Navigating on any incline increases the danger of the machine losing traction or
rolling over, especially if the surface is wet. If you lose control, get out of the way immediately to
avoid personal injury. Navigation on inclines should be especially slow and turns very gradual. Refer to the
incline diagram in the section, “GROUND TRANSPORT
{
XE "GROUND TRANSPORT"
}
”. Wheel
housing frame must be locked before moving unit on any surface including inclines.
Avoid operating adjacent to drop-offs or embankments.
Always leave machine parked on a level surface.
Do not leave machine unattended with the engine
{
XE "ENGINE"
}
running.
Do not operate machine near any source of flammable dust or vapors.
WARNING
: Sparks from the engine
{
XE "ENGINE"
}
exhaust can cause an explosion or fire in a
flammable or explosive atmosphere. Fuel fumes can catch fire or explode.
Do not operate machine near flames or sparks.
WARNING
: Fuel fumes can catch fire or explode. If fuel is spilled, do not attempt to start engine
{
XE "ENGINE"
}
but move the machine away from the area of spillage and avoid creating any source
of
ignition until the vapors have dissipated.
Shut off engine
{
XE "ENGINE"
}
and allow it to cool before refueling.
WARNING
: Fuel fumes can catch fire or explode. Refuel outdoors and do not smoke when
refueling. Do not refuel near a source flames or sparks. Always store fuel in containers
specifically designed for this purpose. Add fuel before starting engine
{
XE "ENGINE"
}
. Never
remove the cap
on the fuel tank or add fuel while the engine
{
XE "ENGINE"
}
is running or when the engine
{
XE
"ENGINE"
}
is hot.
WARNING
: Replace all fuel tank and container caps securely.
Do not touch the engine
{
XE "ENGINE"
}
, muffler, or any of the belt components until cool.
WARNING
: Muffler and engine
{
XE "ENGINE"
}
get hot enough to cause serious burns. For the
safety of yourself and others, allow enough time for the engine
{
XE "ENGINE"
}
, muffler, and the
hydraulic fluid
{
XE "HYDRAULIC FLUID"
}
to cool completely before performing any cleaning or
maintenance
{
XE "MAINTENANCE"
}
.
WARNING
: Stay clear of the articulation area while the engine
{
XE "ENGINE"
}
is running.
