13
4.Engine starting sequence
Before starting engine
Carefully read the gasoline engine operation manual before starting the engine. The
handle cover is equipped with an engine switch. Check the "ON/OFF" positions. Set
the engine switch lever in the ON position, set all moving parts in the neutral position.
Check for safety - covers are in position and not damaged and there is no person
around the machine - before starting the engine. Do not start the engine indoors
without an appropriate ventilator.
Starting the engine
1) Do not grip the main clutch lever.
2) Set the throttle lever in the high-speed position.
3) Set the engine switch in the ON position.
4) Set the strainer lever in the open position.
5) Pull the choke lever and pull the recoil starter, and the engine will start.
6) Return the choke lever.
4-1
WARNING
4-2
CAUTION
High-speed
OFF
ON
Open
3. Fastening of each portion
Many parts are fastened by bolts. Bolts and nuts may be loosened some time after
initial operation. Fasten them to the specified torque.
M6
M8
M10
M16
Normal bolt
8 (80)
18 (180)
36 (360)
1.5-pitch left-hand thread: 36 (360)
Heat treated bolt
36 (360)
72 (720)
Appropriate fastening torque N.m (kgf-cm)
Main clutch lever
