BARONESS PEDESTRIAN MOWERS GROOMER ADJUSTMENT
The setting bar for the Baroness LM56/66 range of mowers has two adjusting screws which
are used as follows:
This setting bar needs to be set as follows:
Groomer height setting screw. If no groomer
is fitted then this screw is not used.
Height of Cut Setting Screw
This end of this screw (as shown) needs to
be adjusted so that it measures the same
distance as the desired groomer setting.
This screw needs to be adjusted so that the
distance between the setting bar and the underside
of the head of the screw (as shown) is adjusted so
that it measures the same distance as the desired
height of cut.
