Baroness LM551, Owner'S Operating Manual, Page: 87 / 102

Adjustment of Positions of Mower Units #2
and #3
Important
When the grass catcher is installed, move the
mower units to the rear position.
Mower units #2 and #3 can be slid to the front
position or rear position. The slide distance is
200 mm (7.87 in).
On a level surface, lower all mower units.
Move the mower unit up/down lever to the
neutral position.
Depress the locking pedal while firmly
depressing the brake pedal to lock it.
Stop the engine.
Remove the clamps from the mower unit up/
down cylinder hoses.
1
enwg3v-001
Adjustment of Positions of Mower Units #2 and #3_001
1 Clamp
Important
Since mower units #2 and #3 are connected,
slide them at the same time.
Follow the steps below to slide the mower
units.
When moving to the front position:
Loosen bolt A of mower unit #3.
Remove bolts B of mower unit #3.
1.
2.
3.
4.
5.
6.
･
[1]
[2]
3 2 1
enwg3v-002
Adjustment of Positions of Mower Units #2 and #3_002
1 Frame
2 Bolt A
3 Bolt B
In the same way, loosen bolt A and
remove bolts B of mower unit #2.
Slide mower units #2 and #3 from the
rear position to the front position.
1
enwg3v-003
Adjustment of Positions of Mower Units #2 and #3_003
1 Mower unit
Install bolts B of mower unit #3.
In the same way, install bolts B of
mower unit #2.
Tighten bolt A and bolts B on both
sides.
[3]
[4]
[5]
[6]
[7]
Maintenance
LM551
Maintenance
Page 5-23
Maintenance Work