Baroness LM551, Owner'S Operating Manual, Page: 86 / 102

Adjustment of Stoppers
Important
The installation method and installation
position of the stoppers differ depending on
the mower unit model.
The stopper is installed to prevent the mower
arm from interfering with the frame.
Install in the appropriate position.
The stopper installation position for each
mower unit model is described below.
A: Installed at the lower position
LS62
・
LS66
LH52
1
2
A
3
euiiz5-001
Adjustment of Stoppers_001
1 Stopper
2 Nut
3 Spring washer
B: Installed at the upper position
LH62
1
3
2
B
euiiz5-002
Adjustment of Stoppers_002
1 Stopper
2 Nut
3 Spring washer
･
･
･
Adjustment of Mower Unit Leveling Spring
A coil spring is installed on the mower unit
coupling.
This keeps the mower unit level.
Adjust the coil spring with the holes in the lift
arm.
#1, #3 and #5
2
1
B
A
imue1o-001
Adjustment of Mower Unit Leveling Spring_001
1 Coil spring
2 Lift arm
A 22 in mower unit (standard position)
B 26 in mower unit
#2 and #4
1
2
B
A
imue1o-002
Adjustment of Mower Unit Leveling Spring_002
1 Coil spring
2 Lift arm
A 22 in mower unit (standard position)
B 26 in mower unit
LM551
Maintenance
Page 5-22
Maintenance Work