Baroness LM551, Owner'S Operating Manual, Page: 53 / 102

Light Switch
Caution
The lights provide auxiliary lighting.
Do not travel or operate the machine at night
or under poor visibility.
The light switch is located in the operation
panel.
When the switch is set to the "ON" position, the
lights turn on. When it is set to the "OFF"
position, the lights turn off.
1
A
B
bnec97-024
Light Switch_001
1 Light switch
A Turn on
B Turn off
Traveling/Working Selector Switch
The traveling/working selector switch is located
in the operation panel.
This can change the positions where mower
units #4 and #5 stop when they are raised.
A
B
1
ufahas-003
Traveling/Working Selector Switch_001
1 Traveling/working selector switch
A Working
B Traveling
When the switch is set to the "Traveling"
position, mower units #4 and #5 are raised to
their highest positions.
When the switch is set to the "Working"
position, mower units #4 and #5 are only raised
halfway.
When set to the "Traveling" position
ufahas-004
Traveling/Working Selector Switch_002
When set to the "Working" position
ufahas-005
Traveling/Working Selector Switch_003
Reel Rotation Switch
Caution
Set the reel rotation switch to the "Rotation"
position immediately before starting cutting
work. At all other times, be sure to leave the
reel rotation switch set to the "Stop" position.
The reel rotation switch is located in the
operation panel and operates rotation of the
reel cutters (cutting cylinders) of the mower
units.
When the reel rotation switch is set to the
"Rotation" position, the reel cutters (cutting
cylinders) of all mower units will rotate for
cutting work. When the reel rotation switch is
set to the "Stop" position, the reel cutters
(cutting cylinders) will stop.
Handling Instructions
LM551
Handling Instructions
Page 4-29
Operation of Each Section