Baroness LM285, Owner'S Operating Manual, Page: 47 / 65

Towing (See the following instruction.)
Caution
Tow the machine at a low speed while paying
close attention.
Caution
Do not touch the unload valve except when
towing the machine.
Caution
Before restarting the engine, be sure to close
the unload valve.
Stop the engine.
（
(See "Procedure to Stop
Engine" (Page 4-18) .)
Pull the parking brake lever and chock the
wheels.
Remove the rear center cover, and then
open the unload valve under the seat.
2
A
1
gay3t1-004
Towing the Machine_001
1 Unload valve
2 Rear center cover
A Remove
Open the unload valve located on the rear
frame.
1
gay3t1-002
Towing the Machine_002
･
1.
2.
3.
4.
1 Unload valve
Important
Before towing, be sure to open the unload
valves in two locations.
While pressing the push button, release the
parking brake lever and remove the wheel
stopper.
Tow the machine slowly.
Opening and Closing the Unload Valve
Caution
Unless you plan to tow the machine, tighten
the needle valve of the unload valve securely
and tighten the lock nut firmly.
Important
Do not rotate the needle valve of the unload
valve more than once.
Loosen the lock nut.
Loosen the needle valve (located in the
center) to open the unload valve.
B
A
2
1
mxqgsb-001
Opening and Closing the Unload Valve_001
1 Needle valve
2 Lock nut
A Tighten
B Loosen
5.
6.
1.
2.
Han
dlin
g Instru
cti
ons
LM285
Handling Instructions
Page 4-27
Travel of Machine