Baroness LM285, Owner'S Operating Manual, Page: 23 / 65

Important
Do not use solid objects, such as a spatula or
screwdriver, or high-pressure water to clean
the radiator or oil cooler.
Otherwise, special fins or tubes may be
damaged, possibly resulting in reduced
cooling performance or coolant leakage.
If the radiator has been contaminated with
dust, be sure to clean it.
After operating the machine in a dusty
environment, it is important to remove dust as
soon as possible.
Open the radiator cover.
Loosen the knobs on the left and right of
the oil cooler, and then tilt the oil cooler.
2 1
37k9g1-001
Cleaning of Radiator_001
1 Radiator
2 Oil cooler
Carefully clean the front and back of the
radiator with water or compressed air.
Coolant
Inspection of Coolant
For details on handling the engine, please refer
to the separate Engine Operating Manual.
Warning
Do not touch the radiator or coolant during
engine operation or right after the engine has
been turned off.
Due to high temperatures, doing so could
cause burns.
Caution
Inspection should take place after the engine
has well cooled down.
1.
2.
3.
Make sure that the coolant level in the
reserve tank is between "Full" and "Low."
1
v2x572-003
Inspection of Coolant_001
1 Reserve tank
Coolant Supply
For details on handling the engine, please refer
to the separate Engine Operating Manual.
Warning
Do not touch the radiator or coolant during
engine operation or right after the engine has
been turned off.
Due to high temperatures, doing so could
cause burns.
After the radiator has well cooled down, open
the radiator cap.
Caution
Supply coolant after the engine has well
cooled down.
Caution
The radiator cap is pressurized.
If you remove the radiator cap while the
engine is overheated, hot steam will burst
out, possibly resulting in burns.
Make sure that the water temperature and
pressure are reduced, and then grab the cap
with a thick cloth and gradually open the cap.
Important
When you supply coolant, be sure to use
clean water, such as tap water.
During winter, remove coolant. Alternatively,
mix long-life coolant and clean water, and
then pour it into the radiator and reserve tank.
1.
Han
dlin
g Instru
cti
ons
LM285
Handling Instructions
Page 4-3
Inspection Before Use