Baroness LM180E, Owner'S Operating Manual

Page: 61 / 72

Rear Mower Tension
Loosen adjusting nut A.
Tighten adjusting nut B, then change the
length of the rod.
Lower the rear mower unit on a level
surface, then adjust the clearance of the
spring to 1 mm (0.04 in).
Tighten adjusting nut A and make sure that
the rod is fixed securely.
Raise the rear mower unit, then make sure
that the reel cutter (cutting cylinder) will not
rotate when the machine travels.
4
A
3
2
1
y6gulf-001
Rear Mower Tension_001
1 Adjusting nut A
2 Adjusting nut B
3 Rod
4 Rear mower unit
A 1 mm (0.04 in)
1.
2.
3.
4.
5.
Rear Mower Unit
Loosen adjusting nut A.
Tighten adjusting nut B, then change the
length of the rod.
Adjust the belt tension so that the belt
slacks by approximately 10 mm (0.39 in)
when you press the middle of the belt with
your finger at 98 N (10 kgf).
Tighten adjusting nut A and make sure that
the rod is fixed securely.
1
3
2
A
l36w96-006
Rear Mower Unit_001
1 Adjusting nut A
2 Adjusting nut B
3 Rod
A 10 mm (0.39 in)
1.
2.
3.
4.
Maintenance
LM180E
Maintenance
Page 5-19
Maintenance Work