Baroness LM180E, Owner'S Operating Manual

Page: 30 / 72

Principal Tightening Torques
Tightening Torque by Model
LM180E
Tighten the following bolts and nuts at the torque specified in the table.
For thread locking adhesive, apply a mild to high-strength thread locker (ThreeBond 1322 or
equivalent anaerobic sealant).
Portion Code Part name
Tightening Torque
Thread locking
adhesive
N-m kgf-cm lb-in
Fron
t
whe
el
Front wheel
shaft
K0071000082
Bolt, with nipple hole
M12-15
36 - 40
371.13 -
407.92 318.64 -
354.04
－
Wheel mounting
shaft
K0000100252 Bolt, M10-25 29 - 38
295.71 -
387.49 256.68 -
336.34
－
Wheel K0000080202 Bolt, M8-20 14 - 19
142.76 -
193.74 123.91 -
168.17
－
Rea
r
whe
el
Wheel K0010100252 Bolt, heat-treated M10-25 58 - 76
591.43 -
774.97 513.36 -
672.68
－
Steering K1604120000
Rod end, spherical bearing
LHSA12
52 - 67
530.24 -
683.20 460.25 -
593.02
○
Handle K0010060202 Bolt, heat-treated M6-20 7 - 9
71.38 -
91.77 61.96 -
79.66
－
Transmission pulley K0010060152 Bolt, heat-treated M6-15 7 - 9
71.38 -
91.77 61.96 -
79.66
○
Mow
er
unit
Bed knife
(Bottom blade)
K0071001182
Screw, heat-treated flathead
M10-16
29 - 38
295.71 -
387.49 256.68 -
336.34
－
Front roller K0010100252 Bolt, heat-treated M10-25 58 - 76
591.43 -
774.97 513.36 -
672.68
－
LM180E
Handling Instructions
Page 4-10
Tightening Torques