30
5. The display will then show:
The data bit length is pre-set at 7. Define the
data bit length as required and press
ENTER.
6. The display will then show:
(0) : 0
(1) : 1
(2) : EVEN
(3) : ODD
The parity is pre-set at EVEN. Select from the
above list and press the number that stands for
the required parity and press the ENTER
button. The selected parity will show on the
display.
7. The display will then show:
The printer interface is pre-set at ON. Press
ENTER to enter the setup. If printer output is
not required, press (2) and ENTER buttons to
quit.
8. The display will show:
(1): 40 Column
(2): 80 Column
RS-232C S
ETUP
D
ATA
B
IT
L
ENGTH
: 7_
RS-232C S
ETUP
P
ARITY
: E
VEN
I
NTERFACE
S
ETUP
P
RINTER
: 1. ON 2. OFF
P
RINTER
T
YPE
S
ETUP
40/80 C
OLUMN
: 80_
RS-232
AND
P
RINTER
