9
Particles
>99%
Bacteria
>99%
Dissolved Organics (>100 MW) >99%
Electrical Requirements
The DIamond RO is equipped with a power cord to be plugged into an electrical outlet of the appropriate voltage.
Voltage and Frequency (Nominal)
Model D12651
100-240 VAC, 47-63 Hz, 1 phase
Model D12661
100-240 VAC, 47-63 Hz, 1 phase
Environmental Conditions
Operating:
4°C - 49°C; 20% to 80% relative humidity, non-condensing.
Installation Category II (over-voltage) in accordance with IEC 664.
Pollution Degree 2 in accordance with IEC 664.
Altitude limit: 3,500 meters.
Storage:
-25°C to 65°C; 10% to 85% relative humidity.
Declaration of Conformity
Barnstead International hereby declares under its sole responsibility that this product conforms with the technical
requirements of the following standards:
EMC:
EN 61000-3-2 Limits for Harmonic Current Emissions
EN 61000-3-3
Limits for Voltage Fluctuations and Flicker
EN 61326-1
Electrical Equipment for Measurement, Control and Laboratory Use ;
Part 1: General Requirements
Safety:
EN61010-1
Safety Requirements for Electrical Equipment for Measurement, Control, and
Laboratory use; Part I: General Requirements
per the provisions of the Low Voltage Directive 73/23/EEC, as amended by 93/68/EEC.
The authorized representative located within the European Community is:
Electrothermal Engineering, Ltd.
419 Sutton Road
Southend On Sea
Essex SS2 5PH
United Kingdom
Copies of the Declaration of Conformity are available upon request.
S
PECIFICATIONS
Summary of Contents for DIamond 1265 Series
Page 2: ...2 ...
Page 34: ...34 Wiring Diagram ...
