Barnett Engineering ProTalk Cv3, Installation & Operation Manual, Page: 18 / 50

PAGE 14 PROGRAMMING
General Configuration
Cv3: "Program Site"
Cv3: "Dial Control is . . ."
You:
Enter new value (0 = off, 1 = on)
Exit to Main Menu
Next setting
Cv3: "Acknowledge Request is . . ."
You:
Enter new value (0 = off, 1 = on)
Exit to Main Menu
Next setting
Cv3: "Acknowledge Timer is . . ."
You:
Enter new value (0 = off, 1 = 30 min, 2 = 60 min,
3 = 120 min, 4 = 240 min)
Exit to Main Menu
Next setting
Cv3: "Relay voices are . . ."
You:
Enter new value (0 = off, 1 = on)
Exit to Main Menu
Next setting
Cv3: "Security Level is . . ."
You:
Enter new value (1, 2 or 3)
Exit to Main Menu
Next setting
Cv3: "Access Code is . . ."
You:
Enter new DTMF code
Exit to Main Menu
Next setting
Cv3: "Modem Code is . . ."
You:
Enter new DTMF code
Exit to Main Menu
Next setting
Cv3: "Auto Report is . . ."
You:
Enter new value (0=disable, 1=enable)
Exit to Main Menu
Next setting