Barnes PGPH Series, Installation Manual

Page: 4 / 16

4
DISCHARGE ....................... 1¼” NPT, Vertical, Bolt-on 1¼” BAF
(CE Only) Flange
LIQUID TEMPERATURE .... 160°F (71°C) Intermittent
MOTOR HOUSING ............. Cast Iron ASTM A-48, Class 30
VOLUTE .............................. Cast Iron ASTM A-48, Class 30
SEAL PLATE ...................... Cast Iron ASTM A-48, Class 30
IMPELLER:
Design ............ 12 vane, vortex, with pump out vanes
on back side. Dynamically balanced,
ISO G6.3
Material ........... Cast Iron
SHREDDING RING ............. Hardened 440C Stainless Steel
Rockwell® C-55
CUTTER .............................. Hardened 440C Stainless Steel
Rockwell® C-55
SHAFT ................................. 416 Stainless Steel
SQUARE RINGS ................. Buna-N
HARDWARE ....................... 300 Series Stainless Steel
PAINT .................................. Air dry enamel, top coat
SEAL Design ............. Single Mechanical, oil fi lled reservoir
Material ........... Rotating Faces - Silicon-Carbide
Stationary Faces - Silicon-Carbide
Elastomer - Buna-N
Hardware - 300 series stainless steel
CORD ENTRY ..................... 30 Ft. (9.1m); 15 Ft. (4.5m) Cord on,
Compact series (CC, CE, CT),
Custom Molded Quick Connected for
sealing and strain relief.
CORD .................................. CSA/UL Approved 12/3 & 12/5
Type SOW
SPEED ................................ 3450 RPM, 60Hz (nominal)
UPPER BEARING:
Design ............. Single Row, Ball, Oil Lubricated
Load ................ Radial
LOWER BEARING:
Design ............. Single Row, Ball, Oil Lubricated
Load ................ Radial & Thrust
MOTOR: Design ............. NEMA L, Single phase, includes
overload protection in the motor)
Oil Filled, Squirrel Cage Induction
Insulation ........ Class F
SINGLE PHASE .................. Capacitor start/capacitor run.
LEVEL CONTROLS: .......... CE
Series .............. SOLD SEPARATELY. Model
ESPS-150™ or ESPS-150
E
™
Environmentally sealed pressure
switch with CPVC housing,
Buna diaphragm, Custom molded
Quick connect for sealing and
strain relief.
OPTIONAL EQUIPMENT .... Seal Material, Additional Cord,
Impeller trims, Moveable Fitting
PUMP SPECIFICATIONS:
inches
(mm)
ESPS Level Control Sold Separatly
PGPP/PGPH