BARMATIC COOLICE ICE250, User Manual

Page: 9 / 28

9
EN
Model ICE250 ICE350 ICE500 ICE700 ICE900
Dimensions [mm] 355x435x(H)590 355x435x(H)590 355x435x(H)590 355x435x(H)590 355x435x(H)590
Production Capacity
[kg]
22 33 47 66 85
Storage Capacity [kg] 4 16 28 40 40
Cooling system Air
Power [W] 300 470 550 780 1000
Daily Electric Con-
sumption [kW]
5,1 8,5 12,6 16,1 16,4
Voltage/ Frequency
[V/Hz]
230V~/ 50
Refrigerant R290
Climate class T
Protection Class Class I
Net weight (kg) 26 38 45 75 85
Installation of Ice Maker
Selection of location
NOTE: Your product should not be in direct contact
with or in close proximity to any heat source
• You should leave at least 10 cm of distance if
you place your ice maker next to other electrical
equipment (such as ovens, computers etc,) that
are considered as heat sources.
• If the product is to be placed next to a wall,
the distance between the back surface of the
product and the wall should not be less than 20
cm (See Figure-7).
• Do not place objects in front of the ventilation
filter of your ice maker that might prevent air
circulation into your product.
• Do not place your product outdoors. This product
is designed to be used indoors.
Electrical Connection
• The voltage and frequency values of the main
power supply have to be the same as written on
the product label. If you are in doubt or need as-
sistance, please contact the nearest Authorized
Service or get help from a qualified electrician.
ATTENTION:
• Make sure your power outlet has been grounded.
• The amperage of the circuit breaker to which the
product will be plugged in should be 10A.
• Do not use power strips with multi sockets or
extension cords to operate your product.
Water Use and Connection
Your ice maker is designed to make ice cubes
within the most ideal time and size. However, it is
important to note that there are some things that will affect the quality of the ice produced by the ma-
chine, as well as the health of the internal compo-
nents of the ice maker.
The Water Supply
• Should be good for human consumption.
• Should have an optimum level of hardness.
• Should include minimal amount of chlorine. IMPORTANT: The optimum water filters to be used
on your product are available and can be purchased
from your Authorized Service. Water temperature
should be between 10°C and 30°C.