BARMATIC COOLICE ICE250, User Manual

Page: 13 / 28

13
EN
Ices are much smaller
than they should be Water is insufficient Place the water level plastic group to its slot
tightly.
Cooling system is faulty Check the water main connection for the water
leakage. Contact the nearest Authorized
Service.
Ices are much bigger
than they should be Time setting is incorrect Set the time on the electronic card to a lower
value.
Sensor is faulty Contact the nearest Authorized Service.
The quantity of the ice is
insufficient Gas leakage in the defrost solenoid Contact the nearest Authorized Service.
Water valve is faulty Contact the nearest Authorized Service.
Device does not stop
when the ice bin is full Sensor is faulty Contact the nearest Authorized Service.
Warranty
Any defect affecting the functionality of the appli-
ance that becomes apparent within one year after
purchase will be corrected by free repair or re-
placement provided the appliance has been used
and maintained in accordance with the instructions
and has not been abused or misused in any way.
Your statutory rights are not affected. If the appli-
ance is claimed under warranty, state where and when it was bought and include proof of purchase
(f.e. receipt).
In line with our policy of continuous product devel-
opment we reserve the right to change the product,
packaging and documentation specifications with-
out notice.
Discarding & Environment
When decommissioning the appliance, the prod-
uct must not be disposed of with other household
waste. Instead, it is your responsibility to dispose to
your waste equipment by handing it over to a des-
ignated collection point. Failure to follow this rule
may be penalized in accordance with applicable
regulations on waste disposal. The separate col-
lection and recycling of your waste equipment at
the time of disposal will help conserve natural re- sources and ensure that it is recycled in a manner
that protects human health and the environment.
For more information about where you can drop off
your waste for recycling, please contact your local
waste collection company. The manufacturers and
importers do not take responsibility for recycling,
treatment and ecological disposal, either directly
or through a public system.