Barko 6025, Service Manual

Page: 36 / 58

page 36 page 36
page 36 page 36 page 36
240 Harvester Feller/
Buncher
1 VIN Open VIN out of range, will create a VIN error =>
VIN=Predefined error value (a)
2 VIN Short-circuited to +BAT VIN out of range, will create a VIN error =>
VIN=Predefined error value (a)
3 VIN Short-circuited to -BAT VIN out of range, will create a VIN error =>
VIN=Predefined error value (a)
IQAN XA2 IQAN XA2
IQAN XA2 IQAN XA2
IQAN XA2
FAILURE MODE
(a). Measure is controlled by CAN master and application as a result from the CAN error message. (a). Measure is controlled by CAN master and application as a result from the CAN error message.
(a). Measure is controlled by CAN master and application as a result from the CAN error message. (a). Measure is controlled by CAN master and application as a result from the CAN error message. (a). Measure is controlled by CAN master and application as a result from the CAN error message.
Turning outputs off is controlled by CAN master unit and therefore delayed maximum 2 bus cycles. Turning outputs off is controlled by CAN master unit and therefore delayed maximum 2 bus cycles.
Turning outputs off is controlled by CAN master unit and therefore delayed maximum 2 bus cycles. Turning outputs off is controlled by CAN master unit and therefore delayed maximum 2 bus cycles. Turning outputs off is controlled by CAN master unit and therefore delayed maximum 2 bus cycles.
Failure mode Failure mode Failure mode Failure mode Failure mode Effect Effect Effect Effect Effect
Failure modes for VIN Failure modes for VIN Failure modes for VIN Failure modes for VIN Failure modes for VIN
1 DIN Open No effect on module, not detected
2 DIN Short-circuited to +BAT No effect on module, not detected
3 DIN Short-circuited to -BAT No effect on module, not detected
Failure mode Failure mode Failure mode Failure mode Failure mode Effect Effect Effect Effect Effect
Failure modes for DIN Failure modes for DIN
Failure modes for DIN Failure modes for DIN
Failure modes for DIN
1 FIN Open No effect on module, not detected
2 FIN Short-circuit to +BAT No effect on module, not detected
3 FIN Short-circuit to -BAT No effect on module, not detected
Failure mode Failure mode Failure mode Failure mode Failure mode Effect Effect Effect Effect Effect
Failure modes for FIN Failure modes for FIN
Failure modes for FIN Failure modes for FIN
Failure modes for FIN
1 DFIN Open No effect on module, not detected
2 DFIN Short-circuit to +BAT No effect on module, not detected
3 DFIN Short-circuit to -BAT No effect on module, not detected
Failure mode Failure mode Failure mode Failure mode Failure mode Effect Effect Effect Effect Effect
Failure modes for DFIN Failure modes for DFIN
Failure modes for DFIN Failure modes for DFIN
Failure modes for DFIN