page 28
595 ML CRL (S)
800-00177
HYDRAULIC PRESSURE SETTINGS (595 ML CRL)
RELIEF VALVES
The Relief Valve portion of the control valves in your Barko Loader limit the flow of hydraulic oil, which relieves the
excess pressure in the hydraulic system, if for any reason pressure is built up above a predetermined, safe, maximum.
CAUTION
The relief valve pressure setting has been arrived at by our engineers after considerable
experience with and testing of this loader. The setting will provide maximum safety and
efficiency of operation. DO NOT ALTER THIS RELIEF SETTING! Relief settings increased
beyond this setting could be dangerous to life, limb and property.
Altering the settings on a new machine will void the warranty.
The following is a list of pressure settings used on your Barko Loader. Any questions should be directed to the factory.
Phone 715-392-5641.
K170 UPPER VALVE SYSTEM (see also Hydraulic Pressure Adjustments for the K170 Valve):
Pump Compensator (track pressure) ............................................. 4500 PSI
Load Sense Releif (working pressure, upper) ................................. 3600 PSI
Main Boom - up (butt end of main boom cylinder) ......................... 4000 PSI ... at the Port Relief.
Main Boom - down (rod end of main boom cylinder) ...................... 1800 PSI ... at the Port Relief.
Stick Boom - up (butt end of secondary boom cylinder) ................ 4000 PSI ... at the Port Relief.
Stick Boom - down (rod end of secondary boom cylinder) ............. 4000 PSI ... at the Port Relief.
Live Heel Boom - up (butt end of live heel boom cylinder) ............. 4000 PSI ... at the Port Relief.
Live Heel Boom - down (rod end of live heel boom cylinder) .......... 1800 PSI ... at the Port Relief.
Open/Close - ports A & B ............................................................. 2500 PSI ... at the Feed Reducers.
Rotate - ports A & B ...................................................................... 1500 PSI ... at the Feed Reducers.
Main Relief (non-adjustable) .......................................................... 5000 PSI
Swing System (high pressure reliefs) ............................................ 3600 PSI ... both right and left.
Servo System (servo relief valve) .................................................. 450 to 500 PSI
Slasher Saw ................................................................................... 2800 PSI
Bar Up & Knives ............................................................................ 1800 PSI
MACHINE FUNCTION SPEEDS
Swing
.............................................. 9 RPM (7 seconds per revolution)
Main Boom 9 seconds extend
.............................................. 7 seconds retract
Stick Boom .............................................. 7 seconds extend
.............................................. 6 seconds retract
Grapple Open/Close ................................. 4 seconds close
.............................................. 3 seconds open
Grappe Rotate .......................................... 30 RPM (2 seconds per revolution)
Travel
.............................................. 2.5 MPH (High Speed Mode)
See the Service Manual for this machine for more specific information.
Summary of Contents for 595ML
