Barko Hydraulics 595ML, Service Manual, Page: 12 / 89

page 12 595 ML CRL (S)
800-00177
WARNING
Any unauthorized welding, alterations, additions
or modifications made to Barko machinery will
void warranty. This machine was designed to do
a specific job and alterations could result in
death, severe injury or property damage.
If Barko-authorized welding must be done, first
disconnect battery, electronic throttle, and radio,
or electrical and structural damage may occur.
WARNING
Hot and pressurized fluid can cause severe
burns. Let system cool before removing any
caps. Then remove caps slowly.
WARNING
If this machine is equipped with electric motor
driven Auxiliary Oil Cooler, be sure battery is
disconnected before going near cooler fan. If
battery is not disconnected, fan may come on at
any time causing severe injury.
WARNING
Hot exhaust pipe can cause severe burns. Do
not touch exhaust pipe when hot, or when engine
is running.
CAUTION
Use only hydraulic fluid in hydraulic oil reservoir.
Use only diesel fuel in fuel reservoir.
Other fluids will cause machine damage.
SAFETY SUMMARY CONTINUED...
DANGER
Improper electrical connections will cause
battery explosion, combustion or electrical
component damage, and may result in death or
severe injury.
This is a 12 volt negative ground electrical
system.
WARNING
Always wear seat belt when operating or running
machine.
CAUTION
Check the Air Cleaner Assembly daily for cracks,
loose clamps, or any other damage. If debris is
able to bypass the Air Cleaner for any reason, it
can damage the engine.
WARNING
Maintain all components of Muffler Assembly to
meet noise and exhaust standards.
WARNING
Improper machine transport can cause death,
severe injury or property damage.
Before transporting:
- Lower and secure boom/attachment to truck/
trailer bed.
- Raise stabilizers.
- Shut down machine to a zero energy state.