Barkey S-line, Instructions For Use Manual, Page: 9 / 38

Device description
Barkey GmbH & Co. KG - Gewerbestrasse 8 - 33818 Leopoldshoehe - Germany - Telephone: +49(0)5202-9801-0
5
Service department: +49(0)5202-9801-30 Fax: +49 (0)5202-9801-99 - email: info@barkey.de
Instructions for Use
Barkey S-line
2.2 Components of the display and control panel
The Barkey S-line has a control panel on the front of the control unit. The control panel is shown
below and contains:
•
a display for showing the temperature of the current actual value of the warming
section
•
a touch panel for switching on and off
•
a luminous ring for showing the device's status.
Fig. 3: Display and control panel
The display and control elements are marked by symbols, which are explained in the following
table:
Touch panel for switching the device on and off.
If the luminous ring around the touch panel shows green the device is
switched on and ready for use.
This symbol means that the Barkey S-line is ready for use if the luminous ring
shows green.
If the luminous ring around the touch panel shows yellow , the device has a
fault and is not ready for use.
This symbol means that there is a fault in the Barkey S-line and an acoustic
alarm is heard, if the luminous ring shows yellow.
This symbol shows that the heater of the warming section is switched on.
The symbol appears in the top left of the display.