background image

TOTE-ALONG OWNER’S INSTRUCTIONS

Block

(1" x 2")

30 GALLON - P/N 31342

Assembly/Operating Instructions:

Parts List:

Drain water 

hook-up:

Connect Tote-Along 

to coach with filler 

hose assembly.  

Vent Tote-Along by 

loosening 3” cap.

Holding tank 

hook-up:

Connect Tote-Along

to coach gate valve

with straight 

bayonet adaptor 

and 3” sewer hose.

Towing tank:

Put tow bracket loop over

ball hitch.  Do not tow

faster than walking speed.

NOTE:

  Towing a Tote-Along

in excess of walking speed

can result in considerable

damage to tank or wheels.

Damage of this nature is

NOT covered under

warranty.

Cleaning:

Attach hose to

filler hose

assembly and

flush tank

thoroughly.

Emptying:

Un-hook Tote-Along from coach.  Pull to approved

dump station.  Vent Tote-Along by loosening 3/4”

cap.  Connect hose and adaptor to tank.  Insert

hose into riser of dump station.  Raise tank to 90

to dump.

°

To extend handle:

Pull handle (12) out until

it’s end hole aligns with

socket (13) hole and

insert quick release

pin (14).

To retract handle:

Put handle (12) fully

into socket (13) and

secure with quick

release pin.

14

12

13

12

14

ITEM  PART NO.     REQ’D  DESCRIPTION

  1 

26799   

TANK 30 GALLON

  2 

20725   

WHEEL (10”)

  3 

20676   

AXLE

  4 

617-0020 

BUSHING

  5 

10225   

HOSE WASHER

  6 

615-0001 

PUSH NUT (5/8”)

  7 

11576   

HOSE CAP (3/4”)

  8 

15655   

FILLER HOSE ASSEMBLY

  9 

26060   

ADAPTOR ASSEMBLY (3”)

 10 

26048   

CAP (3”)

 11 

25524   

WARNING LABEL

 12 

31724   

HANDLE

 13 

31724   

SOCKET

 14 

643-0024 

QUICK RELEASE PIN

 15 

602-0014 

SCREW

 16 

619-0011 

EXTERNAL LOCK WASHER

 17 

10400   

HOSE CLAMP

 18 

12316   

SEWER HOSE (5’)

 19 

17274   

WARNING LABEL

 20 

26097   

STRAP (3”)

 21 

26096   

GASKET

HELPFUL TIPS:  THE SEWER HOSE HAS TO FIT SNUGLY TO PREVENT LEAKAGE.  THE EASIEST WAY TO GET SEWER HOSE TO FIT ONTO ADAPTOR IS

TO HEAT IT (EX. BLOW DRYER).  IT WILL EXPAND SO YOU CAN EASILY THEAD IT ONTO ADAPTOR.  SECURE WITH HOSE CLAMP.  ANOTHER OPTION

IS TO HAVE PATIENCE AND HOLD  A COUPLE OF THE THREADS ON ONE SIDE, WHILE TRYING TO GET THE THREADS ALL THE WAY AROUND THE

ADAPTOR--IT CAN BE DONE (I TRIED IT AND I AM NOT A PATIENT PERSON).  

PAGE 1 of 1

PAGE: 

DATE:

FORM #:

REVISION LETTER: ECN#:

APPROVED: 

    

ALL

  

29 FEB 12

26594

   

H

14513

Barker Manufacturing Company

1125 Watkins Road / PO Box 460

Battle Creek, MI 49016

Phone 269-965-2371 • Fax 269-965-2389 • www.barkermfg.com

E-Mail:  service@ barkermfg.com or [email protected]

                                                                              

1

2

2

3

4

5

5

5

6

7

8

9

10

11

12

13

14

16

17

18

19

20

15

Long hub side    
toward tank.      

21

Reviews: