MAC Address
The MAC address of the device is printed on the label placed below the data plate sticker on
the bottom of the device.
Two additional MAC address stickers come with the device, one intended for placing on the
top of the device before mounting and cabling and one for documentation purposes.
3.7 Device Status LEDs
The green and red LEDs
B
are used to signal the current status of the device. For a detailed
description of the different LED states please refer to the corresponding software manual.
The green and red device status LEDs are directly connected to the IP Audio Module.
3.8 Reset button
An reset push button
A
is directly connected to “software reset“ input of the IP Audio Module.
Intended use : reset (reboot) / factory defaults (see software manual for details).
BARIX AG |
14/26
Both LEDs:
On, Off, Blinking depending on loaded software
