BARIX EXSTREAMER GOLD, User Manual

Page: 27 / 31

Barix Exstreamer Gold User Manual Version 01.01
Page 25
11 FAQ and Troubleshooting
Q: I don’t see any status lights on at all.
A: Make sure the power cable is correctly plugged into the
unit and make sure the power supply is plugged into the
wall.
Q: Red status light is flashing red.
A: Make sure the network cable is plugged into the unit.
The status light on the jack indicates if you are connected
to the network or not. Make sure the Music Server
program is running on the network. You can also ping the
device to see if it’s on your network.
Q: How do I ping the Barix Exstreamer to see if it’s on my
network?
A: You can ping any device on your network by opening a
DOS command box.
Type ping and the IP address of the unit to see if you can
get a response.
Example: ping 192.168.2.10
The proper response would be to see the message “reply
from 192.168.2.10”.
If you see the message “request timed out”, it means that
the Barix Exstreamer is not on your network or that you
have entered the wrong numbers for the IP address.
Q: When I type in the IP address in the browser I get a
“This Page Cannot Be Displayed” message
A: This means that you can not connect to the Barix
Exstreamer. There could be a couple of different reasons.
Make sure you are typing in the IP address correctly.
Check the cables to make sure the Barix Exstreamer is
properly connected to the network.
Q: Will the Barix Exstreamer work on my operating
system?
A: The Barix Exstreamer works on virtually any operating
system because the zServer software is a portable java
application that was designed to run regardless of which
operating system it is on. To control the Barix Exstreamer
a standard web browser is all you need.
12 Technical specifications
Audio Format:
MP3 (up to 320 kBit), uncompressed formats (WAV) in
future versions
Audio Interfaces:
Stereo RCA 4.2Vpp max, 2 x 20W speaker out (8
Ω
,
4
Ω
@ 60% max vol.) wire up to 16AWG / 1.6mm
²
,
S/PDIF out (optical, RCA),
level, bass and treble adjustable by browser
Network Interface:
RJ45 10/100 Mbit Ethernet (Auto), TCP/IP, UDP, ICMP,
DHCP, BOOTP, AutoIP, SonicIP
® , IPzator ™ , SMB/CIFS,
integrated web server for control and configuration
Control Interfaces:
DSub 9pin male (9600 Baud 8, N, 1), Two 1/8”
(3.5mm) jacks for IR receiver and emitter diodes
Misc:
Two LED (red and green) status indicators
Reset/Factory default button
Power requirements:
20 VDC 3 Amps, 100 - 240 VAC 50/60 Hz power supply
included, consumption up to 50W
Case:
Aluminum, 400 grams
6.5" x 1.4" x 5.5"
165 mm x 36 mm x 140 mm
Environmental conditions:
Temperature: 32 ~ 104° F / 0 ~ 40° C
Humidity: 0 ~ 70% relative humidity non-condensing
Certifications:
FCC A, CE A
User Interface:
Browser based (integrated web server), serial port or
Ethernet control API for home automation systems