BARIX EXSTREAMER GOLD, User Manual

Page: 16 / 31

Barix Exstreamer Gold User Manual Version 01.01
Page 14
7.5 Audio settings
You only need to adjust this section if you would like your
Barix Exstreamer to start up with custom sound
adjustments. For example you would like your Barix
Exstreamer to always start with maximum bass, than you
could adjust that here to become default. These
adjustments will be stored even if the unit looses power.
Volume
Select the preferred volume (power up value).
Volume Gain
Select "0", "-3" or "-6" dB to adjust the line output level to
the sensitivity of the attached device. Select "-6" to prevent
distortion when driving 4 Ohm speakers at a high volume
setting.
Mute Volume
Choose "On" to mute the sound output at startup else
choose "Off".
Lock Volume
Choose "On" to lock volume on the control interface. This
denies the volume control by the user. "Off" allows free
volume control.
Balance
Choose between "Left max." and "Right max." (L10..R10).
Bass
Choose between "-10" and "10".
Treble
Choose between "-10" and "10".
Loudness Level
Choose between "0" and "20".
Loudness
Switch the Loudness "On" or "Off".
Output Mode
Select Stereo, Mono or Bridge. If Mono is selected the
audio output is always mono. On Bridge mode the right
channel is inverted and audio output is mono. The Bridge
mode is used to allow a bigger output signal.
Configuration Auto Store
Stores the configuration automatically 30 sec after the last
change in the control interface. The stored parameters are
volume, mute, volume lock, balance, bass, treble, loudness
on/off, shuffle and repeat.
7.6 Playlist settings
These settings adjust the playlist properties.
Own Name
You can enter the name of the Barix Exstreamer here. This
name is displayed in the file info frame on the device status
page. This name will be returned when using the
DISCOVER command (see technical documentation) and
will be used for the SYNC function by other Barix
Exstreamers.
Shuffle
This action automatically shuffles the media files inside a
playlist and plays them randomly non stop.
Repeat
If "Off" then nothing is repeated. If "Song" is selected the
actual song is played non stop. If "Playlist" is selected the
actual playlist is repeated non stop.
Show Cover
If enabled a cover image of the selected playlist is shown on
the right side of the playlist. The name of the cover file has
to match the name of the playlist file but using a ".jpg"
extension and must be stored in the same directory as the
playlist itself.
Walk Through Playlists
If set to "Yes", then it will play the next playlist after the
last one finishes. With "Yes" all playlists will play back to
back automatically.
Info Update Delay
If set to zero, the info frame will not be updated. Else every
n second the file info will be updated.
Playlist Path Match String / Subst String
If the path of a song in a playlist starts with the match
string, it will be replaced with the subst string.