BARIX EXSTREAMER GOLD, User Manual

Page: 15 / 31

Barix Exstreamer Gold User Manual Version 01.01
Page 13
Receiver settings
TCP Streaming Listen Port
Use this parameter to configure the TCP streaming listen
port on which the Barix Exstreamer is listening for a
stream. The listener is always active in Barix Exstreamer
Mode 4. In all other modes the listener is active when the
Barix Exstreamer is stopped.
UDP Streaming Listen Port
Use this parameter to configure the UDP streaming listen
port on which the Barix Exstreamer is listening for a
stream. The listener is always active. The Barix Exstreamer
has to be stopped before a stream can be sent to this port.
Sync Port
This parameter should only be changed if you use a firewall.
Enter the used port number for the sync stream (between
0 and 65535). When set to 0 the port is calculated by an
algorithm.
General settings
Start Threshold
The Start Threshold is the amount of bytes the Barix
Exstreamer will buffer the TCP stream before starting the
playback. Valid is a value from
"0" to "65535".
UDP Start Threshold
The Start Threshold is the amount of bytes the Barix
Exstreamer will buffer the UDP stream before starting the
playback. Valid is a value from
"0" to "65535".
Buffer Underrun Mode
The Buffer Underrun Mode defines the action if the
streaming buffer underruns during an open TCP
connection. In this case one possibility is to
"disconnect"
the TCP connection. The other option is to
"reconnect"
again the same stream.
Buffer Underrun Timeout
The Buffer Underrun Timeout defines the amount of time
in seconds since the streaming buffer is empty until the
Buffer Underrun Mode action will be executed.
Number Of Reconnections
The Number Of Reconnections defines how many times a
reconnection will be tried on a streaming buffer underrun if
the Buffer Underrun Mode is set to
"reconnect". "0" means
forever.
Connection Timeout
The Connection Timeout defines how many milliseconds to
wait for a TCP streaming connection.
Init Sequence
This command sequence is always executed immediately
after startup. See the Barix Exstreamer Technical
Documentation for a complete list of commands.
7.4 Streaming settings “CIFS/Samba”
This feature will use a simple Windows or Linux share,
no zServer is needed!
Server settings
Press the button to change to the “Standard” application.
Playlists Path
This is the path to the share for the playlists directory.
Example: //192.168.2.10/media/playlists
Folder Path
This is the path to the share for the folder directory.
Example: //192.168.2.10/media
CIFS/Samba User / Password
Enter the user name and password that has at least read
access to the shares of the Playlists Path and Folder Path.
The Receiver settings and the General setting are equal to
the application type “Standard”!