Barix Exstreamer 100 User Manual Version 07.07
Page
21
8
IR Remote control
Follow this instructions if you have purchased the optional
IR Remote control kit.
To prepare the IR Remote Control for usage open the
battery compartment and check the signs of polarity.
Insert the two batteries accordingly into the IR remote
control. The IR Remote Control is now ready to operate.
Connect the serial cable of the IR Serial receiver to the
serial port of the Barix Exstreamer. Make sure you have
lign of sight with the IR Serial receiver from where you
want to use the IR remote control.
On power up the blue LED will be on until the Barix
Exstreamer has set the network and announced the IP
Address. The function of this LED can be changed in the
configuration Serial settings by the field "RTS function" (see
section 7.9 Serial settings). The Installation is completed.
The Exstreamer can now be controlled through your IR
remote control. Enjoy the comfort and ease of use!
Mute / Unmute the Barix Exstreamer´s Output.
Switch to previous / next song in the current playlist.
Decrease /Increase volume of Barix Exstreamer Output.
Switch to first song of previous / next playlist.
Play playlist one to ten.
Stop the current song.
Play the current song.
Pause the current song.
REPEAT Toggle repeat mode for song / playlist / off.
SHUFFLE
Toggle shuffle mode on / off.
Refreshs the list of playlists entries on the control page
SYNC with first discovered Barix SYNC master device
The following keys are currently not being used (ready for
future use): ON/OFF | WAKEUP
