4
• INTRODUCTION
•
Sleek design with tempered mirror glass doors
to reflect UV light and help protect your wine.
Dual zone design means you can control the
temperature of each zone individually, with the
right and left zones ranging from 5-18°C. Soft
white LED light. Features ten stylish wooden
shelves made of beech with space for up to
12 bottles in each zone. Compressor cooling
technology with automatic defrost feature
to make this unit as easy as possible to use.
Ventilation Space - a minimum space of 10cm
is required at the rear, top and both sides of
the fridge. This will maximise the efficiency,
performance and life of the fridge and ensure
that there is sufficient space for the hinge to
operate effectively.
• SPECIFICATION
• Model no: ......................................... DH97
•
Actual Product Width:........................508mm
• Capacity: .......................................24 bottles
•
Energy: efficiency class: ............................ G
•
Frequency: ............................................ 50Hz
•
Max. bottle height: .......................... 320mm
•
Noise level: ........................................... 43dB
•
Power Cable Length:...............................1.7m
•
Dimensions (WxDxH): ......510x460x800mm
•
QC - Electrical Class:............................Class 1
•
QC - Plug Type:...................................3-Pin BS
•
Rated Current: ........................................ 0.6A
•
Temperature range: .......................... 5 -18°C
•
Voltage: ................................................. 230V
•
Volume: ................................................... 65L
• INSTALLATION
• The unit is designed to be free-standing.
Ventilation Space - a minimum space of
10cm is required for the rear, top and sides
of the fridge and 5cm under the base. This
will maximise the efficiency, performance and
life of the fridge and also ensure that there
is sufficient space for the hinge to operate
effectively.
• DO NOT
locate the unit in a damp or moist
location.
• DO NOT
locate the unit in direct sunlight.
•
Ensure that the floor surface is strong and
stable enough to support the unit when it is
fully loaded.
• Level the unit when in location by using the
adjustable levelling feet in each corner.
• Once in position allow the unit to rest for an
hour before turning it on.
•
Allow the unit 2 - 3 hours to reach set
temperature after switching on before placing
any items in the compartment.
• PARTS AND FEATURES
•
1: Upper Hinge
•
2: Door Gasket
•
3: Door Handle
•
4: Shelves
•
5: Display Shelves
•
6: Bottom Hinge
1
2
3
4
5
6
