3
Safety Instructions
ELECTRICAL SAFETY
WARNING!
It is the responsibility of the owner and the operator to read, understand and comply with the following:
You must check all electrical products, before use, to ensure that they are safe. You must inspect power cables, plugs, sockets
And any other connectors for wear or damage. You must ensure that the risk of electric shock is minimised by the installation of
Appropriate safety devices. A Residual Current Circuit Breaker (RCCB) should be incorporated in the main distribution board. You
Must also read and understand the following instructions concerning electrical safety.
9
Ensure that cables are always protected against short circuit and overload.
9
Regularly inspect power supply cables and plugs for wear or damage and check all connections
To ensure that none are loose.
9
Ensure that the voltage marked on the appliance matches the power supply to be
U
sed and that the plug is fitted with the correct fuse - see fuse rating at right.
8
DO NOT
use worn or damaged cables, plugs or connectors. Have any faulty item repaired or
Replaced immediately by a competent electrician.
9
It is recommended that this appliance is wired directly to a fused isolator switch. If, however, a plug
I
s fitted, the following applies:
9
Fit a new plug according to the following instructions (UK only).
A) Connect the GREEN/YELLOW earth wire to the earth terminal ‘E’.
B) Connect the BROWN live wire to the live terminal ‘L’.
C) Connect the BLUE neutral wire to the neutral terminal ‘N’.
D) After wiring, check that there are no bare wires, that all wires have been correctly connected,
That the cable restraint is tight.
GENERAL SAFETY
IMPORTANT NOTICES
9
W
hen using an electrical appliance, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or
injury, including the following:
9
Read instructions before use.
9
Ensure the voltage is compliant with the voltage range stated on the rating label, and ensure the earthing of the socket is in good
condition.
9
I
f the power supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order
to avoid a hazard.
8
DO NOT
upend this product or incline it over a 45° angle.
9
To protect against risk of electric shock,
DO NOT
pour water on cord, plug, ventilation, or immerse the appliance in water or any other
liquid.
9
Keep the appliance 8cm from other objects to ensure good ventilation.
8
DO NOT
use accessories that are not recommended by the Manufacturer.
8
DO NOT
use the appliance close by flames, hot plates or stoves.
8
DO NOT
switch the power button on and off frequently (ensure a 5min interval at least) to avoid the damage to the compressor.
8
DO NOT
insert metal implements or other objects into the appliance this can cause fire, electric shock and damage to the unit.
9
When taking out the ice cream,
DO NOT
knock the barrel or edge of barrel to protect the barrel from damage.
8
DO NOT
switch on the power before installing the barrel or blender blade.
9
T
he initial temperature of the ingredients is 25±5℃.
DO NOT
put the ingredients into freezer for pre-freezing, as this will block the blender
blade before the ice cream has formed.
8
DO NOT
remove the blender blade when the appliance is plugged in or working.
8
DO NOT
use outdoors.
WARNING!
Unplug the appliance after using and before cleaning.
9
Never clean with scouring powders or hard implements.
9
Please keep the instruction manual.
9
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children
without supervision.
9
Children should be supervised to ensure that they
DO NOT
play with the appliance.
9
This appliance is intended to be used in household and similar applications such as
– staff kitchen areas in shops, offices and other working environments;
– farm houses and by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments;
– catering and similar non-retail applications
WARNING: DO NOT
store explosive substances such as aerosol cans with a flammable propellant in this appliance.
WARNING:
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
WARNING: DO NOT
use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the
manufacturer.
WARNING: DO NOT
damage the refrigerant circuit.
WARNING: DO NOT
use electrical appliances inside the food storage compartments of the appliance, unless they are of the type
recommended by the manufacturer.
WARNING:
When disposing of the appliance, do so only at an authorized waste disposal centre.
DO NOT
expose to flame.
9
The refrigerant isobutene (R600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of
environmental compatibility, which is nevertheless flammable. During transportation and installation of the appliance, ensure that none of
the components of the refrigerant circuit becomes damaged.
9
T
he refrigerant (R600a) is flammable.
9
Professional repair only.
WARNING!
risk of fire
9
If the refrigerant circuit should be damaged:
9
A
void opening flames and sources of ignition.
9
Thoroughly ventilate the room in which the appliance is situated.
Recommended fuse rating
13 Amp
