7
•
17. When paused, it is normal that the fan will keep running for 20 seconds.
•
18. If the door is not closed within 5 minutes, all buttons and icons will turn off and the unit will turn off.
•
19. When cooking time is complete, the unit will beep once and the display will show “END”. The fan will continue to run for 20 seconds to cool
down and return to standby mode.
•
20. If you want to stop cooking, please hold down the power ON/OFF button for 3 seconds.
TEMPERATURE & TIME SETTINGS (OPTIONAL)
• Once the preset or cooking mode is selected, the default temperature and time setting will be shown on the digital display screen. You can adjust
the temperature by pressing the temperature settings buttons and to decrease or increase.
• To adjust the time, simply press the time control buttons to decrease or increase the cooking time.
• NOTE:
Adjustable temperature range: 40-200°C.
•
Short press the temperature setting buttons to increase/decrease the temperature by 5°C each time. Press and hold the temperature settings
button (for 3 seconds) to increase/decrease the temperature rapidly by 5°C.
•
Adjustable time range: 1-60mins.
•
Short press the time setting buttons to increase/decrease the time by 1 minute each time. Press and hold the time setting buttons (for 3
seconds) to increase/decrease the time by 5 minutes each time.
• CAUTION:
The temperature setting is NOT adjustable when in FULL STEAM MODE.
START/PAUSE OPERATION
•
When the preset or cooking mode is selected, the default time and temperature will flash.
•
Press the START/PAUSE button to start cooking.
•
Short press the START/PAUSE button to pause the cooking.
•
When cooking is paused, the START/PAUSE button, and the cooking mode/preset button will flash, and the timer will also stop counting.
•
To resume cooking, short press the START/PAUSE button again.
•
The buttons will stop flashing and the digital screen will continue timing.
• NOTE:
If you open the door during the cooking time it will automatically pause the operation. To resume, close the oven door to continue cooking.
•
To completely stop cooking, press and hold the ON/OFF button for 3 seconds.
MAINTENANCE NOTES
FILL WATER TANK REMINDER
• The
INSUFFICIENT WATER
button will flash when the water level is low and needs refilling.
•
It will flash for 30 seconds, a buzzer will ring and the ERROR CODE E5 will appear.
•
Take out the water tank from the underside of the unit, fill it with water and then re-insert it.
• Press the
INSUFFICIENT WATER
button to continue cooking.
• DO NOT
fill the wastewater box, it may cause water to leak out during operation.
INTERIOR LIGHT
•
•The light can be turned on or off during cooking by pressing the LIGHT ON/OFF button. It will automatically turn OFF after 30 seconds.
• •The interior light will automatically turn ON when you open the oven door, and turn OFF when you close the door.
•
•To manually turn OFF the light when the oven door is open, press the LIGHT ON/OFF button.
SELF CLEANING FUNCTION
•
The self-cleaning function is designed to clean any built-up scale inside of the steam generator. The entire process takes 60 minutes and it will
clean in 3 stages:
• DESCALER CLEANING | WATER CLEANING | DRYING
•
While you can use the self-cleaning method as often as you like, it is best to use the self-cleaning function before you use the unit for the first
time, and after which “CLER” is shown on the digital display screen. This will display after 80 hours of use since the last clean was undertaken.
• Follow the below to use the self-cleaning mode function.
•
1. Take out the water tank from the bottom of the unit.
•
2. Fill the water tank with clean water or descaler as specified on the container. We strongly advise using a food-grade descaler such as citric acid
powder to clean.
•
3. Insert the water tank back into the unit and turn ON. If you are using the oven for the first time, you can use just clean water for the first self-
clean.
•
4. Press and hold the (STEAM+) button for 5 seconds to start the self-cleaning function, working its way through STAGES 1-3:
• STAGE 1: DESCALER CLEANING.
During this stage, the digital display screen will show “CL:01”. The START/PAUSE button will begin to flash and
the screen will show “CL:02” as it goes into the next phase.
•
To finish this section of cleaning, you will need to empty and refill the water tank within 5 minutes after the 1st stage (Descaler Cleaning) has
completed.
•
Once this stage has completed a buzzer will sound. You will notice “CL:02” displayed on the digital screen. After you have refilled the water, press
the START/PAUSE button to start the 2nd and 3rd stages. If you miss this step - the self-cleaning function mode will cancel and you will need to
restart again.
•
Once the setup is complete for STAGE 2, press the flashing START/PAUSE button to initiate the clean. It will automatically cycle through to STAGE
2 and STAGE 3.
•
At the conclusion of STAGE 3, the buzzer will sound and the digital display screen will show END.
Summary of Contents for DH171
Page 4: ...4...