Important Information
Please read these instructions carefully. Note the safe operational requirements, warnings & cautions. Use the product correctly and with care
for the purpose for which it is intended. Failure to do so may cause damage and/or personal injury and will invalidate the warranty. Keep these
instructions safe for future use.
Refer to
instruction
manual
Warning:
Hot
Surface
Specification
Safety Instructions
•
GENERA
L SAFET
Y
WARNING! The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations that
may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into
this
product, but must be applied by the operator.
WARNING!
It is the user’s responsibility to check the following:
Check all electrical equipment and appliances to ensure that they are safe before using. Inspect power supply leads, plugs and all
electrical connections for wear and damage. Sealey recommend that an RCD (Residual Current Device) is used with all electrical
products. You may obtain an RCD by contacting your local Sealey stockist.
If the heater is used in the course of business duties, it must be maintained in a safe condition and routinely PAT (Portable Appliance
Test) tested.
1.1.
ELECTRICAL SAFETY INFORMATION.
It is important that the following information is read and understood.
1.1.1.
Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply.
1.1.2.
Regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that they are secure.
1.1.3.
IMPORTANT:
Ensure that the voltage rating on the appliance suits the power supply to be used and that the plug is fitted with the
correct fuse - see fuse rating in these instructions.
8
DO NOT
pull or carry the appliance by the power cable.
8
DO NOT
pull the plug from the socket by the cable.
8
DO NOT
use worn or damaged cables, plugs or connectors. Ensure that any faulty item is repaired or replaced
immediately by a qualified electrician.
1.1.4.
This product is fitted with a BS1363/A 13 Amp 3 pin plug.
Attribute
DH135 / DH136
DH137 / DH138
DH139 / DH140
Actual Product Width
52cm
65cm
12cm
Colour:
Black / White
Black / White
Black / White
Control Style:
Touch Screen, Digital or
Remote Control
Touch Screen, Digital or
Remote Control
Touch Screen, Digital or
Remote Control
Heating Technology:
Convection
Convection
Convection
IP Rating:
IP24
IP24
IP24
Material:
Glass
Glass
Glass
Mounting Location:
Floor or Wall
Floor or Wall
Floor or Wall
Number of Heat
Settings:
3
3
3
Product Dimensions
(WxDxH):
52 x 12 x 47cm
65 x 12 x 47cm
78 x 12 x 47cm
Rated Power:
1000W
1500W
2000W
Supply:
230V 50Hz
230V 50Hz
230V 50Hz
Warning:
Do not cover
Warning:
Indoor use only
