Manual 2100-746
Page
15 of 55
9. Press UP/DOWN buttons to scroll to number of
dehumidifier units; press Next button.
10. Press Yes or No button to select if humidifier is
present; press Next button.
11. Press Configure to configure any of the following:
Emergency Off alarm, Generator Run alarm, High
Humidity alarm, Dust Alarm, Dehumidification
Active. Press Next or Home button.
System Setup Menu
1. Press Setup button on Home screen.
2. Press System Setup button.
3. Press preferred language button; press Next
button.
4. Press Yes button if password protection is desired;
if Yes is selected, a prompt will appear to enter a
PIN number. Press Next button.
5. Press button to select twinning staging logic
choice; press Next button.
6. Press button to select staging logic choice; press
Next button.
7. Press UP/DOWN buttons to select lead-lag change
over time; press Next button.
8. Press button to select continuous blower logic
choice; press Next button.
9. Press button to select degrees choice (Fahrenheit/
Celsius); press Next button.
10. Press button to select temperature sensor logic
choice; press Next button.
11. Press button to select REM 1 temperature sensor
choice; press Next button.
12. Press button to select REM 2 temperature sensor
choice; press Next button.
13. Press UP/DOWN buttons to select equipment
minimum run time; press Next button.
14. Press UP/DOWN buttons to select maximum
number of units while in generator mode; press
Next button.
15. Press UP/DOWN buttons to select touch screen
display brightness; press Next or Home button.
Date/Time Setup Menu
1. Press Setup button on Home screen.
2. Press Date/Time Setup button.
3. Press UP/DOWN arrow to select Hour.
4. Press UP/DOWN arrow to select Minute.
5. Press UP/DOWN arrow to select AM/PM.
6. Press Next button.
7. Press UP/DOWN arrow to select Month.
8. Press UP/DOWN arrow to select Day.
9. Press UP/DOWN arrow to select Year.
10. Press Next button.
11. Press Home button.
Comfort Mode
1. Press Comfort button on Home screen to engage;
Comfort Mode Active message will appear on Home
screen. Press Comfort button again to disengage.
System Status
1. Press Menu button on Home screen.
2. Press System Status button.
3. Press back button.
4. Press Home button.
Cooling Set Points
1. Press Menu button on Home screen.
2. Press Set Points button.
3. Press UP/DOWN arrow to scroll to Cooling Set
Point.
4. Press UP/DOWN arrow to scroll to Cooling Set
Point Value.
5. Press Confirm button.
6. Press Home button.
Heating Set Points
1. Press Menu button on Home screen.
2. Press Set Points button.
3. Press UP/DOWN arrow to scroll to Heating Set
Point.
4. Press UP/DOWN arrow to scroll to Heating Set
Point Value
5. Press Confirm button.
6. Press Home button.
Comfort Mode Cooling Set Points
1. Press Menu button on Home screen.
2. Press Set Points button.
3. Press UP/DOWN arrow to scroll to Comfort Mode
Cooling Set Point.
4. Press UP/DOWN arrow to scroll to Comfort Mode
Cooling Set Point Value.
5. Press Confirm button.
6. Press Home button.
