Manual 2100-614K
Page
21 of 61
Set Trap Destination
To adjust a cell within this table, highlight the cell to be
changed and press the “SNMP SET” button. A popup
will appear and the value can be changed.
MIB File Structure Contents
The following commands are used with the MIB browser
to access information.
Get – Used to retrieve information from a single
variable. Used on product, alarmstatus, temperatures,
setpoints, generalstatus, systemstatus and
operationstatus folders.
Get Next – Used to retrieve the information from
the next variable in the MIB file. Used on product,
alarmstatus, temperatures, setpoints, generalstatus,
systemstatus and operation status folders.
Get Subtree – Used to retrieve the information from
a single folder or multiple folders. Used on product,
alarmstatus, temperatures, setpoints, generalstatus,
systemstatus, and operation status folders. This
can also be used to poll all data by selecting “iso.
org.dod.internet.private.enterprises.TTMI.BARD.
MC4000Series” and using get subtree.
Table View – Used to view the information in the setup
folder. Displays the table to configure trap receiver
settings.
Folder
SNMP Points List
Description
Setup
ipv4TrapReceiverNumber
Used to indicate the row of the table and is not configurable
Setup
ipv4TrapEnabled
Used to enable up to 4 IPv4 trap recipients
Setup
ipv4TrapReceiverIPAddress
Used to set the IP address destination for each IPv4 recipients
Setup
ipv4TrapCommunity
Used to set the community for each IPv4 recipient
Setup
ipv6TrapReceiverNumber
Used to indicate the row of the table and is not configurable
Setup
ipv6TrapEnabled
Used to enable up to 4 ipv6 trap recipients
Setup
ipv6TrapReceiverIPAddress
Used to set the IP address destination for each ipv6 recipients
Setup
ipv6TrapCommunity
Used to set the community for each ipv6 recipient
Product
Site
The name of the site where the equipment is located
Product
Name
The product name
Product
Version
The product version
Product
Date
The product date
Product
ModelSystem1
The model number of unit 1
Product
SerialSystem1
The serial number of unit 1
Product
ModelSystem2
The model number of unit 2
Product
SerialSystem2
The serial number of unit 2
AlarmStatus
FireSmokeShutdown
Fire Smoke Shutdown Alarm
AlarmStatus
ControllerFailure
Controller Failure Alarm
AlarmStatus
SecondStageCooling
Second stage cooling alarm
AlarmStatus
LowTempAlarm
Low temperature alarm
AlarmStatus
HighTempAlarm1
High temperature 1 alarm
Continued on page 22
