Manual 2100-759
Page
4 of 16
Model
For Use with
Following Units
CRVS-3A
T24H
T24H1D
T30H
T30H1D
T30S
T30S1D
INSTALLATION
Basic Installation
1. Unpack the ventilator assembly which includes the
integral ventilator with attached electrical harness
and miscellaneous hardware.
2. Remove and save the existing exterior blower
access and service access panels on the Bard wall
mount unit (see Figure 1).
Open and lock disconnect switch before
installing this accessory to prevent injury or
death due to electrical shock or contact with
moving parts. Turn thermostat to off.
!
WARNING
FIGURE 1
Removal of Exterior Panels
