Manual 2100-679
Page
2 of 2
68.0
F
7
F
7
F
7
73.0
68.0
F
7
On/Off shows during
heating or cooling mode
only. Use this button to
quickly stop or start the
system in the desired
mode.
The date and time will
appear only if properly set.
Automatic Heating/Cooling Mode
In Auto mode, the setpoint located
directly under the blue line represents the
temperature which, when reached, will
trigger the system to enter cooling mode.
Similarly, the setpoint located directly above
the red line is the temperature which, when
reached, will put the system into heating
mode.
During setpoints adjustment, the large digits
are temporarily used to display the Cooling or
Heating Setpoints.
Normal temperature display resumes after
the setpoints are adjusted and the adjusted
heating and cooling setpoints are displayed in
the setpoint bar.
Cooling Only or Heating Only Mode
In Cooling Only or Heating Only mode, the
value displayed in the setpoint bar is the
current heating setpoint. To adjust it, use the
up and down arrows.
During setpoint adjustment, the large digits
are temporarily used to display the new
setpoint.
Normal temperature display then resumes and
the actual occupied setpoint is
displayed in the setpoint bar.
Fan Mode displays the blower operation
choices (Off, On, Auto and Smart).
Tap to switch between Auto,
Cooling, Heating and Off modes.
Variations
