Page 21 of 22
IMPRESS
–
Setup Guide for Informs CF-PM43-1 Thermal Transfer Printer
•
Adjust the Printhead Balance:
If your labels are printing lighter on one side than the
other, you probably have an unbalanced printhead. The printer is adjusted at the factory
for full-width media. If you are using media that is less than full-width (4 inches or 102
mm), Intermec recommends that you adjust the position of the printhead balance arm
so that the printhead is correctly pressured against the media.
1.
Open the media cover.
2.
If you have thermal transfer ribbon installed, remove it.
3.
Turn the printhead lift lever counterclockwise to raise the printhead.