19
5.3
Correction of paper sensor with printer diagnostic tool
5.3.1 Auto Calibration
1. Make sure the paper is installed correctly and the print head is closed
。
Note: this type of paper sensor is not adjustable, please confirm the gap position paper
2. Printer power supply
。
3. Open the Diagnostic tool tool and set the transmission interface (default is USB)
。
The default communication interface for this
printer diagnostic utility program is USB, so
if you are using a USB to connect the
computer to the transmission, this part does
not have to change its settings
4. Press press Calibate key
。
5. Select the type of paper and press the "Calibate" button, the printer will
automatically feed movement sensor calibration
。
Gap sensor
Paper sensor
