Barco XDX, Installation Manual

Page: 47 / 90

47 R5914481 /02 XDX
3
2
4
5
Image 4–10
2 UPS Power cord
3 Cable gland
4 Protected Earth (PE) wire
5 Power wires L and N
Tip: Check for good fixation by pulling on each wire.
5. Secure the AC power cord by fastening the cable gland (reference 3). Use a 24 mm open-end wrench.
6. Place the net input cover back and seal it. Tighten the two screws (reference 1), using a T20 Torx
screwdriver.
4.5 Installation of a lens
How to install a lens into the B-lens holder, while using the optical adapter
1. Place the lens holder in the “unlocked” position. Do this by pulling the lens lock handle (reference 1,
Image 4–11 ) outward and then towards the lens power supply socket (reference 2) as illustrated.
1
2
Image 4–11 Lens installation, preparing the lens holder
2. Remove the dust cover from the lens opening.
Installation procedures