Barco XDX, Installation Manual

Page: 48 / 90

R5914481 /02 XDX 48
Image 4–12
Tip: While not placed in the projector, place the dust cover in a lockable plastic bag to prevent
dust from gathering on the cover.
3. Take the lens assembly out of its packing material and remove the lens caps on both sides.
4. Gently insert the lens in such a way that the lens connector matches the socket (reference 2).
Image 4–13 Lens installation
5. Insert the lens until the connector seats into the socket.
Warning: Do not release the lens yet, as the lens may fall out of the lens holder.
6. Secure the lens in the lens holder by sliding the primary lens lock handle into the “locked” position (to the
top of the projector). Ensure the lens touches the front plate of the lens holder.
Installation procedures