Barco XDX Series, Installation Manual

Page: 46 / 90

R5914481 /02 XDX 46
Required tools
• Torx screwdriver T20
• Flat screwdriver
• Open-end wrench 24 mm
• Nut driver 10 mm
• Torque wrench with 10 mm hexagon socket
Required parts
Certified AC power supply cord 1.5 mm², 14 AWG, min 300 V
How to connect a UPS unit with the projector electronics?
1. Make sure the net input cover has been removed. For more info, see “Accessing the power connections”,
page 42 .
2. Loosen the top nuts on the six UPS configuration pins. Use a 10 mm nut driver.
Image 4–8
3. Replace the links as illustrated.
Image 4–9
4. Guide the AC power cord (reference 2) through the cable gland (reference 3). Connect the wires
(references 4 and 5) to the 3-terminal strip as illustrated. Use a torque screwdriver to fasten the screws of
the 3-terminal strip with a torque of
0.75 Nm .
Warning: Always connect the PE wire (reference 4) first, then the other wires.
Installation procedures