Barco XDX Series, Installation Manual

Page: 69 / 90

69 R5914481 /02 XDX
6. Click Proceed to have the image added in the Manual update section of the page.
Image 6–11 Example of a software package inserted via USB device
7. Click “ Image [name] from the USB device connected to the projector ” and confirm.
The software update will start.
Update progress
The update will proceed as follows:
1. The software package will be installed on the projector.
Image 6–12 Example of an update in progress
2. Once the software package has been installed, the following message will be prompted and the projector
will reboot.
Image 6–13 Example of the prompted reboot message
3. Take note : While rebooting, you will lose connection to the projector.
4. Once rebooted, every projector component will be updated to the version included in the software
package. Take into account that it might take a while until all components have been updated.
Image 6–14 Example of the components update page.
5. Once every component has been updated, you will be redirected to the Web Communicator login page.
Starting the projector for the first time