Barco XDL, Installation Manual

Page: 46 / 88

R5906150 /05 XDL 46
5.1 Remote control, battery installation
Where to find the batteries for the remote control ?
The batteries are not placed in the remote control unit to avoid control operation in its package, resulting in a
shorter battery life time. At delivery the batteries can be found in a separated bag attached to the remote
control unit. Before using your remote control, install the batteries first.
How to install
1. Push the battery cover tab with the fingernail a little backwards (1) and pull, at the same time, the cover
upwards (2).
1
2
Image 5 – 1
2. Insert the two AA size batteries, making sure the polarities match the + and - marks inside the battery
compartment.
Tip: Use alkaline batteries for optimum range and life time.
+
-
-
+
Image 5 – 2
3. Insert (1) both lower tabs of the battery cover in the gaps at the bottom of the remote control, and press (2)
the cover until it clicks in place.
+
-
-
+
1
2
Image 5 – 3
When replacing batteries, the broadcast address of the RCU will be reset to its default value '0'.
Installation procedures