Barco ULTRA REALITY 7000 R9002810, Owner'S Manual

Page: 50 / 99

7. Image Menu
Selecting Auto in case of a Video source may shrink the image horizontally
How to change the Aspect ratio ?
1. Press MENU to activate the Toolbar
2. Press → to select
Image
3. Press ↓ to Pull down the
Image
menu (image 7-3)
4. Use ↑ or ↓ to select
Aspect ratio
5. Press ENTER to confirm
Image 7-3
7.3 Show native resolution
What can be done ?
The aim here is to always show the resolution of the source independently of the resolution of the LCD panels.
The “show native resolution” function will handle the sources as follows:
Source Projected image
Name Ratio Resolution Ratio Resolution Particularities
Reality
xga
4:3 1024x768 4:3 1024x768 image ceside blanked
sxga
5:4 1280x1024 5:4 1280x1024 image ceside blanked
sxga+
4:3 1400x1050 4:3 1400x1050 image ceside blanked
uxga
4:3 1600x1200 4:3 1600x1200 image centered
Table 7-1
Show native resolution = ON in case of a BARCO ULTRA REALITY 7000 projector
The
Full screen representation
function on the other hand forces to use the complete native resolution of the
LCD panels,
How to enable the “Show native resolution” function?
1. Press MENU to activate the Toolbar
2. Press → to select the
Image
item
3. Press ↓ to Pull down the
Image
menu
4. Use ↑ or ↓ to select
Show native resolution
(image 7-4)
46 R5976455 BARCO ULTRA REALITY 7000 30062003