Barco ULTRA REALITY 7000 R9002810, Owner'S Manual

Page: 55 / 99

7. Image Menu
The filmmode detection insures that these converted signals are shown without artefacts.
This function may cause undesired effects on standard sources, therefore it can be disabled (OFF) at any time
Enabling/disabling the filmmode detection
1. Press MENU to activate the Toolbar
2. Press → to select the
Image
item
3. Press ↓ to Pull down the
Image
menu
4. Use ↑ or ↓ to select
Filmmode detection
5. Press → to pull down the menu
6. Use ↓ or ↑ to enable or disable the Filmmode detection
7. Press ENTER
A white bullet shows the active setting (image 7-14)
Image 7-14
7.8 Advanced settings
7.8.1 Noise reduction
How to change the Noise reduction ?
1. Press MENU to activate the Toolbar
2. Press → to select the
Image
item
3. Press ↓ to Pull down the
Image
menu
4. Use ↑ or ↓ to select
settings
5. Press → to pull down the menu
6. Use ↓ or ↑ to select
Noise reduction
7. Press ENTER
On the screen appears now a sliderbox
8. Use ← or → , the numeric keys on the remote, or the keypad to change the Noise reduction setting.
R5976455 BARCO ULTRA REALITY 7000 30062003 51