Barco UDX, Installation Manual

Page: 43 / 150

R5906113 /08 UDX 43
3. Turn the adjustable feet in or out until the projected hatch pattern has a perfect rectangle shape and is leveled.
Image 4-2: Level alignment
When this is achieved, the projector is set horizontal and vertical at right angles to the screen.
S
C
R
E
E
N
S
C
R
E
E
N
Image 4-3: Angle adjustment
4.3 Connecting the projector to the external cooler
What has to be done?
When opting to install a “ silent ” version of the projector, the cooling must be installed as a separate device.
The cooling circuit of the external cooler has to be connected with the cooling circuit of the projector. To make
this possible, you will need the following:
• 2 cooling tubes of 8 meters length
• The data cable to connect between the UDX and the external cooler
How to access the hose connections on the projector
1. Remove the back cover of the projector. See “ Removal of the back cover ” , page 108.
2. Loosen the two screws holding the protective plate from the back cover (reference 1 Image 4-4).
1
Image 4-4
3. Remove the protective plate (reference 2, Image 4-5) from the back cover.
Physical Installation