![background image](http://html1.mh-extra.com/html/barco/udx/udx_installation-manual_4258216043.webp)
R5906113 /08
UDX
43
3.
Turn the adjustable feet in or out until the projected hatch pattern has a perfect rectangle shape and is leveled.
Image 4-2: Level alignment
When this is achieved, the projector is set horizontal and vertical at right angles to the screen.
S
C
R
E
E
N
S
C
R
E
E
N
Image 4-3: Angle adjustment
4.3 Connecting the projector to the external cooler
What has to be done?
When opting to install a
“
silent
”
version of the projector, the cooling must be installed as a separate device.
The cooling circuit of the external cooler has to be connected with the cooling circuit of the projector. To make
this possible, you will need the following:
•
2 cooling tubes of 8 meters length
•
The data cable to connect between the UDX and the external cooler
How to access the hose connections on the projector
1.
Remove the back cover of the projector. See
“
”
2.
Loosen the two screws holding the protective plate from the back cover (reference 1 Image 4-4).
1
Image 4-4
3.
Remove the protective plate (reference 2, Image 4-5) from the back cover.
Summary of Contents for UDX
