R5906113 UDX 07/07/2017
73
6. Getting Started
•
Device serial number and article number
•
Current firmware version and model name
•
Current illumination (in percentage)
•
Projector runtime in hours
•
Uptime in hours
•
Chosen source
•
Current resolution and refresh rate
•
Chosen communication method and IP address (if connected)
•
Active functions
Starting image projection
1. Make sure the available sources are connected to the appropriate input ports.
Tip:
If properly connected, the “SYNC” LED will lit up ORANGE.
2. Press the
Input Selection
button on the keypad or on the remote control until:
- the LED of the selected source (the “SEL” LED) lit up GREEN, and
- the image of the selected source is projected.
Image 6-3
1
2
Summary of Contents for UDX 4K22
