Barco UDM Series Installation Manual Download Page 77

Page: 77 / 104

R5911438 /08

UDM

6.2 Rigging frame

CAUTION:

Projectors installed without rigging frame requires bracket(s) for safe installation if it is to

be placed in other positions than the ceiling or desktop. See

“Wall or ceiling mount without rigging

frame”, page 52

Rigging frame

The UDM series multifunctional rigging frame is designed for the Barco UDM projectors, and can not be used
for other equipment.

See rigging frame specific documentation for how to install the projector in to the frame.

Projector and rigging frame is normally delivered complete assembled together if ordered. (See also

“Flight

case”, page 76

The rigging frame without projector weight about ±23 kg (±50 lb).

Image 6–5 Projector installed in the rigging frame.

Flight case and rigging frame

Summary of Contents for UDM Series









































































































Search results

Summary of Contents for UDM Series

Reviews:

Related manuals for UDM Series

Brands by name

Popular brands

Barco UDM Series, Installation Manual

Search results

Summary of Contents for UDM Series

Reviews:

Related manuals for UDM Series

Brands by name

Popular brands